Custom-Fit Car Floor Mats: What Comes in a Full 4 or 5-Piece Set

If you are comparing quotes for custom-fit mats, the short answer is: 1 set corresponds to 1 vehicle and it normally has 4 pieces (2 front + 2 rear), or 5 pieces when it includes the trunk liner. The trunk liner is the piece almost every buyer forgets to order — and the one that shows up most often in delivery complaints.

How many pieces are in a set

Rule of thumb: if your car has a trunk you can see when you open the trunk lid, order the trunk liner. It's the piece that protects the area where rain gets in with the lid open and where dirty luggage stains the carpet. Without it, the set looks visually incomplete and the protection is only half done.

How the order is numbered

Each piece in the set has its own code. On the order you give the vehicle code and the pieces you want, and the sorting is done by model and by side (driver/passenger). For the buyer, this means two practical things:

• You don't have to decide left or right. The sorting is already done at the factory — we just need the vehicle code and the number of sets.
• Replacing a single loose piece is possible, but it costs more than buying the whole set, because a loose piece requires a color and batch check. If you're unsure about the configuration, order the complete set.

Why a set isn't 4x the price of a single piece

This is a common question from people who priced out pieces separately. The reason is operational:

The unit price of a loose piece carries the same preparation cost as a piece in a complete set — machine setup, dimensional inspection and individual packaging. What changes is scale: when you order 300 sets of the same model, the machine runs in series, inspection is done by batch, and packaging is collective. That's why the price per set drops relative to the price of 4 loose pieces, and that's why the MOQ is always counted per set, never per piece.

What comes with each set

Besides the silicone pieces, the kit leaves the factory with:

• Fixing hardware (clips and/or screws, depending on the model)
• Manual or installation instructions in Portuguese
• Individual packaging per set, with transport protection
• Sampling-based dimensional inspection, recorded per batch

How to order the right configuration

If you still haven't decided between a complete set and loose pieces, the guide custom-fit mat or universal helps you define it.

To avoid receiving an incomplete set, include the following in your quote request:

1. Make, model and year (or year range)
2. Whether the car is a sedan, hatch, wagon or SUV
3. Whether your model already has a trunk liner — if in doubt, request the 5-piece configuration
4. Whether the car has all-wheel drive or not (on some models it changes the rear fixing)

With those four pieces of information, the team indicates the exact kit composition before production, and the sample you approve is the same composition that goes into the batch.

Frequently asked questions

Does one set cover one car or two?

One car. Each set is made for one vehicle. For a fleet of 50 cars, the order is 50 sets — the 300-set MOQ means, for example, six different models with 50 cars each, or one model with 300 units.

Is the trunk liner included?

It depends on the configuration you choose. By default the complete set is 4 pieces; the trunk liner is the 5th piece and has to be requested. Ask for the 5 pieces if your car has an exposed trunk.

Can I buy just the front kit?

Yes, it's possible. But keep in mind that the heaviest wear in Brazil is actually on the rear floor (access and cargo), and the 4-piece set works out cheaper per set. If your case is light urban use on a tight budget, the front kit is a legitimate option.

How do I know my vehicle code?

You don't need to know it. Give us the make, model and year and the team identifies the code and the available composition. For new models or specific versions, the code is confirmed before production.

Can the color be chosen?

The colors generally available per model are black, carbon texture and gray. Special colors depend on volume and may carry a higher MOQ — state your preference in the quote request so we can confirm availability.

Do you ship to my address?

Yes, we ship to the address given in the quote, with packaging prepared for international or domestic transport. Request a quote with the destination and ZIP code so we can calculate the freight.

Next step

Send the make, model, year and the configuration you want (4 or 5 pieces). The team confirms the available composition, the lead time and the freight — and, if you prefer, sends a physical sample before mass production.

Note: the values, lead times and MOQ in this guide are STORP TYPER line references and may vary by model, color and batch. Specific test reports (RoHS/REACH) are available on request.

Browse mats by brand   Request a quote on WhatsApp